What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 23.06.2025 14:10
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Barnstars:
Carlos Alcaraz roars all the way back to win the French Open again - The Washington Post
One is “what exactly is in a ‘surge protector’ ? ”
This is 'the assistant's answer'
What is lightning?
Ethereum faces macro crisis: Can ETH’s $2K hold? – KEY insights reveal… - AMBCrypto
So, the voltage could go up to 500 volts, and the fuse will not open up.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–16 [ OO OLAOYE OYEBODE ]
An AC voltage/ current source, and an ac inductive load.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Life-building molecules discovered in the disk of a young star - Earth.com
I post the exact comment here.
what exactly is a ‘surge’ protector?
Here is a simplified AC power diagram.
Padres Designate Jason Heyward For Assignment - MLB Trade Rumors
A fuse is a non-resetable over current circuit protector.
It also is a device that limits the change in current flow.
For this case there are devices called Metal oxide varistors (MOV).
2025 NCAA baseball bracket: Men's College World Series scores, schedule - NCAA.com
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Edit 2024–10.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
nine
but I think this circuit , shows a few more pieces.
eight
Why did the American's mulberry harbor not hold up after D-Day?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Stop Work Orders At NASA JPL - NASA Watch
This is where the MOV conducts again, and dissipated the energy.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Scientists just learned the age of America's deepest canyon - SFGATE
He then describes Rainy Season and Lightning.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
At least they know the answer if they wanted it.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This one hit behind the barn.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Because the load is inductive, the current lags the voltage.(by a bit).
There are two important concepts here.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
These are simplified answers to the original question, and does not change anything I wrote above.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
It seems Mohan does not understand the difference between a comment and an Answer.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
The MOV will conduct when the voltage exceeds 50% of line voltage.
The other is “what does a “fuse” do?”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
[old diagram got deleted by accident]
(Dc diagram shown, AC is similar).
a photo is worth a thousand words.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
What does a fuse do?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
A circuit breaker is similar, but is resettable.
There are three different concepts here that are getting confused.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
In schematic diagrams this is the symbol for a fuse:
2024–10–14 [Omar Gharbi Omar Gharbi ]
But it can get overloaded, and no longer works.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
First Sentence:
Upvotes:
The bolt then partially travels down the line to your home.
He then asserts :
These devices are installed between the “hot” and “neutral” and protective ground.
At one ohm, the resistor has a maximum of 1 watt power.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
so, what happens?
Now when you have a certain ac resistance, then a current flows in a loop.
The third is lightning and “how it gets conducted into a home.”
He then describes the function of a fuse.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
the problem then depends on "how fast does the fuse operate?".
But… the neutral is now “floating” because of the 1 ohm resistance.
but this device (an Inductor) … impedes the rapid changes in the current.
One
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is where this question deviates from being a 'generic' question, and becomes more specific.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–10[John johnson John Johnson ]
[image of Common-mode choke]
This device then solves the entire problem.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].